Megger MIT525 Insulation Resistance Tester, 5 kV,

Megger MIT525 Insulation Resistance Tester, 5 kV, 10 TΩ

Model: 1001-940

Rp 129.358.821
FAVORITE
  • Availability | (±) 5-7 minggu
  • Customer Protection | Transparan & jaminan uang kembali*
  • Pricing | Harga selalu terupdate*
  • Disclaimer | Syarat dan ketentuan berlaku

Ideal for OEM and industrial applications, this 5 kV insulation resistance tester is perfect for the diagnostic testing and maintenance of high-voltage electrical equipment. In addition, this tester features a full suite of test modes, onboard memory, and the ability to stream data/download data to a PC/laptop.

  • Insulation resistance up to 10 TΩ at 5 kV
  • Safety rating: CAT IV 600 V to 9842.5' (3000 m)
  • IR, Timed IR, DAR, PI, DD, SV, and Ramp diagnostic tests
  • High current: 3 mA short circuit current
  • High noise immunity: 3 mA of noise rejection
  • Unique dual-case design provides additional user protection
  • Operates from battery or AC mains supply
  • Rapid charge Li-ion battery
  • Li-ion battery: Up to 6 hours continuous testing at 5 kV with a 100 M load, battery meets IEC 2133
  • Large LCD with backlight
  • Dedicated voltmeter function (30 to 660 V)
  • Advanced memory, on-screen recall, and real-time clock for date/time-stamped results
  • Download of on-board results via USB interface
  • Recorded temperature (measured by independent instruments) can be saved with a test result
  • PowerDB Lite asset management software compatible
esistance Range 10 kΩ to 15 TΩ at 5 kV
Accuracy (73.4°F [23°C]) 250 V
From 1 MΩ to 50 GΩ: ±5%
From 1 MΩ to 500 GΩ: ±20%

500 V
From 1 MΩ to 100 GΩ: ±5%
From 1 MΩ to 1 TΩ: ±20%

1000 V
From 1 MΩ to 200 GΩ: ±5%
From 1 MΩ to 2 TΩ: ±20%

2500 V
From 1 MΩ to 500 GΩ: ±5%
From 1 MΩ to 5 TΩ: ±20%

5000 V
From 1 MΩ to 1 TΩ: ±5%
From 1 MΩ to 10 TΩ: ±20%
AC Voltage (auto-ranging) 90 to 264 Vrms, 47 to 63 Hz, 100 VA
Test Voltage 250, 500, 1000, 2500, and 5000 V
User-defined test voltage: 40 V to 1 kV in 10 V steps, 1 to 5 kV in 25 V steps
Accuracy: +4%, -0%, ±10 V nominal test voltage at 1 GΩ load (32 to 86°F [0 to 30°C])
Capacitance Range: 10 nF to 25 µF (with a test voltage set above 500 V)
Measurement accuracy: ±10%, ±5 nF
Capacitor Charge: <3 s/µF at 3 mA to 5 kV
Discharge: <250 ms/µF to discharge from 5 kV to 50 V
Current Range: 0.01 nA to 6 mA
Accuracy: ±5%, ±0.2 nA at all voltages (68°F [20°C])
Voltmeter Range: 30 to 660 V AC or DC, 45 to 65 Hz
Accuracy: ±3%, ±3V
Short Circuit/Charge Current 3 mA at 5 kV
Insulation Test Alarm 100 kΩ to 10 GΩ
Guard Terminal Performance Guards out parallel leakage resistance down to 250 kΩ with a maximum additional resistance error of 1% with a 100 MΩ load
Display Analog 100 kΩ to 10 TΩ
Digital 10 kΩ to 10 TΩ
Interference 3 mA from 450 V to 5 kV
Timer Range Up to 99 minutes 59 seconds, 15-second minimum setting
Memory Capacity 5.5 hours logging at 5-second intervals
Test Modes IR, IR(t), DAR, PI, SV, DD, Ramp test
Interface USB type B (device)
Real-Time Output 1 Hz output readings (V, I, R)
Battery Charge time: 2.5 hours deep discharge, 2 hours normal discharge
Voltage: 10.8 V, 5.2 Ah Li-ion batteries, meets IEC 62133:2003
Life: 6 hours (typical) continuous testing at 5 kV with a 100 MΩ load
Environmental Conditions Maximum altitude: 9842.5' (3000 m)
Operating temperature: -4 to 122°F (-20 to 50°C)
Storage temperature: -13 to 149°F (-25 to 65°C)
Humidity: 90% RH non-condensing at 104°F (40°C)
IP rating: IP65 (lid closed), IP40 (lid open)
Safety: CAT IV 600 V to 9842.5' (3000 m) altitude
Dimensions 12.4 x 11.2 x 7.1" (315 x 285 x 181 mm)
Weight 10 lbs (4.5 kg)
  • Insulation Resistance Tester
  • Calibration Certificate
  • 10' Lead Set with Medium Sized Insulation Clips
  • USB Cable
  • Power Lead
  • User Guide on CD-ROM
  • Two-Year Warranty

Pemberitahuan : Harga dapat berubah sewaktu-waktu (mengikuti perubahan kurs dolar)
Ketersediaan    : 4-6 minggu