This locator consists of two parts: a transmitter and a receiver. The transmitter emits a frequency that induces onto nearby pipes and cables. The receiver detects these radio frequencies, enabling the operator to accurately locate and trace pipes and cables. In manual gain mode, the user can adjust sensitivity to suit different scenarios. The receiver is equipped with directional indicators (arrows) to guide the user closer to the target.
Depth measurements can be taken when directional indicators show both arrows and the center bar. The receiver controls are intuitive, requiring minimal training, and can be operated with one hand. The transmitter has 33 kHz and 82 kHz operating frequencies, four operating modes, and a 1 W boost to help locate more utilities.
This locator is great for single utility locates where accurate identification and tracing of one service amongst others is required. Schonstedt designed it for infrequent users needing an affordable solution to locate buried utilities quickly. Plumbers, electricians, landscapers, contractors, and facilities maintenance technicians are some fields that might benefit from using this locator. It is helpful for tracing utility lines, water pipes, sewer, cable, and gas lines.
Specifications | Schonstedt u-Locate Pipe and Cable Locator |
Operating Frequencies | 82 kHz |
Passive Mode | 50/60 Hz |
Max Depth Active Mode | 19' (5.8 m) |
Positional Accuracy | 5% |
Battery Requirements | 6 x AA Receiver |
Usage Hours | 20 hours |
Audio Output | 10 to 1500 Hz ( determined by signal strength) 0 to 70 dB SPL (volume controlled) |
Ingress Protection Rating | Weatherproof to NEMA3S and IP65 |
Construction High Impact | ABS Plastic |
Operating Temperature | -14 to 122°F (10 to + 50°C) |
Weight Including Batteries | 2.4 lbs (1.1 kg) |
Warranty | 1 year (with an option to extend to 3 years at the point of purchase) |
Overall Dimensions | 25.6 x 3.9 x 8.7" (65.1 x 9.9 x 22.1 cm) |
Operating Frequencies | 33 kHz and 82 kHz |
Operating Modes | Direct Connect, Inductive frequenciesDirect Connect 33 kHz and 82 kHzInductive, 82 kHz onlyAccessory Connection, 33 kHz and 82 kHz |
Maximum Output Power (direct Connect Mode, @ 1000 O Load) | 1 W (boost) |
Maximum Output Voltage | 23 V RMS into open circuit |
Max Output Current | 66 mA into short circuit |
Battery Type | 4 x D (LR20) cell or equivalent |
Battery Life | DC mode 15/40 hours (Boost v standard) Induction mode 9/28 hours (Boost v standard) |
Dimensions | 10.8 x 6.7 x 7.8" (17 x 27.5 x 20 cm) |
Weight | 5.95 lbs (2.75 kg) |
Operating Temperature | -4 to 122°F (-10 to 50°C) |
Water And Dust Resistance | Rated IP54 |
Pemberitahuan : Harga dapat berubah sewaktu-waktu (mengikuti perubahan kurs dolar)
Ketersediaan : 4-6 minggu