The Subsurface PL-VF10R is an easy-to-use, affordable, and accurate pipe and cable locator with variable frequencies and a 10 W maximum power output for virtually any subsurface object, offering powerful technology for detection, measurement, and operation. In addition, the Subsurface PL-VF10R comes with rechargeable battery packs for more environmental and cost-effective locating. The PL-VF10R pipe and locator may detect buried power cables, CAT V cables, gas and water pipes, sewer lines, telecommunication lines, fiber optic cables with sheath, sondes, and inspection camera transmitters.
The Subsurface PL-VF10R Locating System provides eight locating modes, an array of antennas, and a multi-channel processor to ensure professional-grade accuracy in field detection. Expect real-time updates on line depth and signal condition, customizable frequencies, and dual-transmitting operational modes from the PL-VF10R underground cable locator. In addition, the Subsurface PL-VF10R pipe and cable locator is adaptable; frequencies and operational modes may be added or deleted on demand to suit the user's locating needs. Perhaps the biggest time-saver is the remote transmitter, which can be controlled from the receiver itself no matter where in 400 m it is.
The Subsurface innovative technology creates a remote link between the transmitter and receiver. The transmitter's output power and frequency can be controlled from the hand-held receiver, eliminating the back-and-forth walking between devices. Pipe and cable locator receivers usually come with preset frequencies, and a customer selects the locator based on the preset frequencies. A unique feature of the Subsurface PL-VF10 pipe and cable locator is that you can customize the frequency for your specific needs.
In addition, this frequency can be changed in the future if desired. The receiver's large, high-contrast LCD offers a visible signal response in any lighting. Automatic depth, automatic current, and proximal directional arrows are readable in the brightest sunshine or back-lit for viewing in dimmer conditions. Whether the locate is measured in feet or miles, 5* or 10* watts of power and automatic impedance matching from 5 ohms to 25,000 ohms, ensures adequate signal. The PL-VF10R Locating System is a must-have for anyone needing a simple and accurate locator. The pipe and cable locator PL-VF10R includes a set of Li-Ion Battery packs for the receiver and transmitter, allowing you to work for over 40 hours (depending on load, frequency, and power settings) without replacing batteries.
| Receiver | |
| Operating Frequencies | 480 kHz, 200 kHz, 131 kHz, 82.315 kHz, 65.536 kHz, 32.768 kHz, 8.192 kHz, 4.010 kHz, 815 Hz, 797 Hz ,640 Hz & 512 Hz |
| Sonde | 640 Hz, 512 Hz, 815 Hz, 8.192 kHz & 32.768 kHz |
| Passive Power Modes | 50env & 60env, Radio Frequency |
| Passive Power Modes | Rectified CP 50 Hz & Rectified CP 60 Hz |
| Antenna Mode | Simultaneous peak/null (dual horizontal antennas & vertical antenna),pin-point peak (dual horizontal antennas), directional guidance, peak (single horizontal antenna) & null (single vertical antenna) |
| Display | Indicators back-lit segmented LCD bar graph, battery condition, continuous mode signal strength, depthmeasurement, line orientation, left/right line guidance,operating mode, volume level & function indicators Audio Indication Variable pitch & Live Sound. 4 volume selections including mute.Current measurement display indicates relative current |
| Power Source | Lithium Ion rechargeable battery |
| Battery Life | Continuous: 30 hours Intermittent: 82 hours |
| Signal Strength | LCD bar graph, absolute signal strength 0 to 999 |
| Left/right Gain Control Guidance Mode | Automatic |
| All Other Locate Modes | Manual gain adjustment & automatic centering |
| Dynamic Range | 126 dB |
| Depth Measurement | 3 digit LCD readout of push-button measurement (1 inch - 30 feet) (.02m-10.6m) with accuracy > 5% of depth. (Digital measurement) |
| Operating Temperature | -4 to +133°F (-20 to 55°C) |
| Ingress Protection Rating | IP65 |
| Dimensions | 30.3 x 9.4" (77cm x 24cm) |
| Weight | C-cell: 4 lbs (1.9 kg) |
| Transmitter | |
| Operating Frequencies | Range from 512 Hz to 480 kHz |
| Indicators Ac | load assistance measurement, relative ohms, voltage, live voltage output, current output, power level,frequency, mode, battery indication alert, low batteryindicator audio/visual with modulated low battery warningtransmitted to the receiver. |
| Load Matching | Automatic from 5 ohms to 25000 Omega |
| Output Power | 10 power settings Low & Medium Frequency |
| Power Source | Rechargeable 10.8 V, 10 amp-hour maintenance free Lithium Ion Battery |
| Battery Life Continuous | 8-20 hours (depending on load, frequency, power setting)Intermittent: 40-60 hours |
| Operating Temperature | -4& F to 133& F (-20°C to 55°C) |
| Ingress Protection Rating | IP65 |
| Hook-up Method | Direct Connection Inductive CoUpling (with optional coupler)Transmitter Induction |
| Range | 0.2w to 10w High |
| Dimensions | 16 x 6.32 x 6" (41 x 16 x 15 cm) |
| Weight | 6 lbs (2.7 kg) |
Pemberitahuan : Harga dapat berubah sewaktu-waktu (mengikuti perubahan kurs dolar)
Ketersediaan : 4-6 minggu
